Samsung WS-32M206V Flat Panel Television User Manual


 
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable)
1 Press the MENU
()
button.
Result
: The main menu is displayed.
2 Press the ENTER () button to select Input.
Result
: The options available in the Input group are
displayed.
3 Press the ENTER () button again to select Source List.
Result
: The options available in the Source List group are
displayed.
4 Press the or button to select signal source, then press the
ENTER () button.
When you connect equipment to the TV, you can choose
between the following sets of jacks :
EXT1 or EXT2 on the
TV’s rear panel, and
EXT3/S-Video on the TV’s side panel.
You can also set these options simply by pressing the
SOURCE ()
button. If you change the external
source while viewing, pictures might take a short period of
time to be switched.
Edit Name
1 Press the MENU
()
button.
Result
: The main menu is displayed.
2 Press the ENTER () button to select Input.
Result
: The options available in the Input group are
displayed.
3 Press the or button to select Edit Name . Press the ENTER
() button.
Result
: The options available in the Edit Name group are
displayed.
4 Press the or button to select external device :
EXT1
-
EXT2
-
EXT3
-
S-Video.
5 Press the ENTER () button.
6 Select the name by pressing the ➛☎or button.
7 Set other signal sources (EXT1, EXT2, EXT3, S-Video) using the
same method as listed above.
8 When you have finished, press the EXIT ( ) button to exit.
Viewing an External Signal Source/Edit Name (depending on the model)
Move Enter Return
Input
Source List : TV
Edit Name
TV
Move Enter Return
Input
Source List : TV
Edit Name
TV
Move
œœ
Adjust Return
Edit Name
EXT1
œœ
------
EXT2 : ------
EXT3 : ------
S-Video : ------
TV
Move
œœ
Adjust Return
Edit Name
EXT1
œœ
DVD
EXT2 : ------
EXT3 : ------
S-Video : ------
TV
Move Enter Return
Source List
TV
EXT1 : ------
EXT2 : ------
EXT3/S-Video : ------
TV
English-35
AA68-03336A-01Eng 6/28/04 4:08 PM Page 35