Filter
Top Products
Basic Operations
Changing Channels
Using the Channel Buttons (CH+ or CH-)
Press the CH+ or CH- to change channels.
When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the
unit has memorized.
You will not see channels that were erased.
Direct Accessing Channels
Press the number buttons to go directly to a channel.
To select a one-digit channel: press the 0-9 number buttons to input the channel number and press ENTER or
wait for some seconds to go to the selected channel.
To select a two-digit channel: press the 0-9 number buttons to input the channel number and press ENTER or
wait for some seconds to go to the selected channel.
To select a three-digit channel: press the 0-9 number buttons to input the channel number one by one, then the
unit goes to the selected channel.
When you use the number buttons, you can directly select channels that were erased.
Note:
Using the LAST button
Press this button to switch between the current channel and the previous channel.
Adjusting the Volume
Using the volume buttons (VOL+ and VOL-)
Press the VOL + or VOL- to increase or decrease the volume.
Using the MUTE button
At any time, you can temporarily cut off the sound using the MUTE button.
Press the MUTE button and the sound cuts off.
1
To turn mute off, press the MUTE button again.
2
17
Selecting a MENU Language
Press Menu to exit.
5
Press MENU to display the menu main page.
1
Press CH+ repeatedly to select Display page./-
2
Press ENTER or VOL+/- to access the submenu.
3
Press ENTER or VOL+/- to toggle between English, French and Spanish.
4
The Language item will be highlighted automatically.
Off
Bright
English
Off
Display
Language
Transparency
Back Light
Captions
CC When Mute
Move Select
Menu to exit
Yes
Factory Reset
On
DCDi
Off
Full screen
Zoom