Filter
Top Products
23. Panel protection---The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or impacted upon by other
objects. Be careful not to be injured by broken glass pieces in case the LCD
panel breaks.
24. Pixel defect---The LCD panel is a very high technology product, giving you finely detailed pictures.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please
note that this does not affect the performance of your product.
Important Safety Precautions (continued)
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
NEC—NATIONAL ELECTRICAL CODE
<If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as
to provide some protection against voltage surges and built-up static charges. Section 810 of the National
Electrical Code provides information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
<An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can collide
with such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or
circuits, as contact with them might be fatal.
22. Power source---This product is intended to be supplied by a listed power supply indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power
company. For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will
prevent damage to the product due to lightning and power line surges. When the unit has to be used with
another power supply voltage, the power cable must be changed. Consult your product dealer. The socket
outlet should be installed near the equipment and easily accessible. Use only the power cord designated by our
dealer to ensure safety and EMC. When connecting other products such as VCRs and personal computers, you
should turn off the power of the unit for protection against electric shock.
4