Sanyo AVL-278 Flat Panel Television User Manual


 
Setting System (continued)
Changing the Position of Image
Press Menu to display the menu main page.
1
Press CH+/- to select H position or V position.
4
Press VOL+/- to adjust the value of the item until the screen is well-aligned.
5
The unit allows you to adjust the position of the screen if it is not well-aligned.
MAIN MENU
40
Press CH repeatedly to select System.+/-
2
Press Enter to access the submenu.
3
Setting System In VGA Mode
Adjusting Clock and Phase
MAIN MENU
40
Press Menu to display the menu main page.
1
Press CH+/- to select Clock or Phase.
4
Press VOL+/- to adjust the value of the item until the screen is well-aligned.
5
Press CH repeatedly to select System.+/-
2
Press Enter to access the submenu.
3
Adjust the clock frequency of the set's internal clock signal. If shimmering or rainbow-like noise is
apparent in
the image, try adjusting the clock frequency setting.
You may find that images blur, depending on the clock phase of your PC's Processor. If you
experience blurring ,
You may quickly adjust the picture by using the Auto button directly. The unit automatically adjusts phase,
clock or position, etc.
The Auto Adjust function only works when the picture is displayed in 16:9 with full screen.
Adjusting the Picture Automatically
Press Menu to display the menu main page.
1
Press CH repeatedly to select System.+/-
2
Press Enter to access the submenu.
3
Press CH+/- repeatedly to select Auto Adjust.
4
Press Enter to confirm.
5
MAIN MENU
Setup
Picture
Sound
CH
System
OSD
TVPC
Setup
Picture
Sound
CH
System
OSD
TVPC
Setup
Picture
Sound
CH
System
OSD
TVPC
24