Filter
Top Products
English -5 -
Your TV will switch on in two
steps:
To switch the TV on:
Your TV will switch on in two steps:
1- Connect thepower to 230VAC 50Hz. Press stand-
by button.Then the TV switches itself to stand-by
mode(Optional).
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
channel number is selected, or Press the -P/CH orP/
CH+ button on theTV or press the Ch+ or Ch- button
on the remote control, so that last mode switched off
is selected.
By either method the TV will switch on. When the TV
is operated for the first time, the following screen
appears:
Language English
AUTO PROGRAM
Country Germany
Text language West
Select your Language, Country and Text language by
using
/
and
/
buttons. Press “OK” buttonto
continue. To cancel, press “BLUE” button.
For more information on this process, see “Install
Menu” section.
To switch the TV off:
Press stand-bybuttonontheremotecontrolorstand-
by button on the TV so the TV will switch to standby
mode. To power down the TV completely, unplug the
power cord from the mains socket.
Navigating the Menu System
M
INFO
OK
SELECT
Fordisplaying
menu options
Fornavigation
To confirm
choices
1- Press “M” to display the menu.
2- Press “
” or “
” button to select an icon. Press
“
” or “OK” button for more options.
3- Use “
” or “
” button to highlight.
4- Press “
” or “
” buttons to change the settings.
Press OK to set as default.
5- To exit the menu or return from sub-menu screen,
press “M”.
These explanations are available for the navigation
of the whole Menu System. To select options that are
explained in the following parts, refer to “Navigating
The Menu System”.
Initial Settings
When the TV is turned on for the first time, it is in the
digitalmode.
Because this is the first time the TV is used, there are
no channels stored in the memory and the following
message appears on the screen.
Please ensureaerialis plugged in.
Do youwant to start first time installation?
Yes No
• To start installation process, select“Yes”, to cancel
select “No”.
•To selectan option“Yes orNo”, highlighttheitem by
using
or buttons andpressthe “OK(SELECT)”
button.
TheIDTVwillautomaticallytunetotheUHFtransmision
channels21to68lookingfordigitalterrestrialTVbroad-
casts and displaying the names of channels found.
This process will take about five minutes. To cancel
searching, you can press the “M” button at any time
during the process.
MENU
BBCONE
BBCTWO
BBCCHOICE
SearchingUHF channels 30. Pleasewait.This will take afew minutes
Cancelsearching
AUTOMATIC SEARCH
Channels:
12 %
01-ENG-42781W-MB26-UKIDTV-BSI-1050UK-(WSUB-ALO-ECOPIP)-SANYO-C2-10050046-50110543.p6510.07.2007, 12:535