Filter
Top Products
15
Picture zoom [DVD]
1. Press the SHIFT + 3 ZOOM buttons during normal, slow or still play.
The central part of the picture is magnified.
- Each time the button is pressed, the zoom mode changes as
follows.
1 v 2 v Off
- Press the 4, a, 5 or b button to change the zoom point.
2. Press the SHIFT + 3 ZOOM buttons to select “ Off” to return to the
original screen.
Note:
Picture zoom may not work on some discs.
Viewing from a desired camera angle (Multi-Angle)
[DVD]
Some DVD discs may contain scenes which have been shot simultaneously
from a number of different camera angles. The jacket or case of discs that
are recorded with angles will be marked.
Example:
Note: The recorded angles differ depending on the disc used.
1. Play the disc that is recorded with angles.
2. Press the SHIFT + 1 ANGLE buttons repeatedly until the desired
angle appears.
Example:
Angle replay [DVD]
During Multi-angle play screen, press the SHIFT + 2 A.REPLAY buttons.
The unit skips back to last approximately 10 seconds, changes it to the
next camera angle and plays it, and continues play. (If desired, press the
button again.)
Repeat play
Press the REPEAT button during play (or programmed play) of the title (or
track) you want to repeat. Each time the button is pressed, the repeat
mode changes as follows.
[DVD]
Chapter (1 REP.): Repeat of chapter being played
Title (ALL REP.): Repeat of title being played
Off: Normal play mode
[CD]
1 (1 REP.): Repeat of track being played
All (ALL REP.): Repeat all tracks
Off: Normal play mode
Designated range repeat play (A-B Repeat)
1. Press the A-B REP button during play at the beginning of the section
you want to repeat (Point A). “ A-” appears on the screen. “A-REP.”
blinks on the display.
2. Press the A-B REP button again at the end of the section (Point B). “A-
B REP.” remains lit on the display.
The section between points A and B is played repeatedly.
3. To return to normal play, press the A-B REP button again.
Note:
Repeat play or A-B repeat play mode may not work correctly with some
discs.
Programmed play [CD]
Up to 20 selections can be programmed.
Programming procedure
1. Press the PROGRAM button when in the stop mode. The programme
mode screen appears. (A simple screen appears in the display on the
player and a more in-depth screen appears on the TV screen).
2. Press the number button(s) to select the track number.
Example:
To select track No.3, press 0, then 3 (or press 3).
To select track No.10, press 1, then 0.
To select track No.24, press 2, then 4.
Note:
If you make a mistake, press the CLEAR button.
3. Press the 5 button to move the highlighted box down.
Example as seen on your TV screen.
4. Repeat step 2 - 3 above to select another track.
5. Press the a button to start play. “PROG.” remains lit.
When all programmed selections have played, the unit stops
automatically.
- The programme contents are retained in memory.
Note:
To play the programme again, press the PROGRAM button to call up the
programme mode screen, then press the a button.
To clear the programme one by one
In the programming mode, press the 4 or 5 button to select the track
number. Then press the CLEAR button.
To clear all the programmes
In the programming mode, press the 4 button to select “All Clear”. Then
press the ENTER button.
To change the programme
1. In the programming mode, press the 4 or 5 button to select the
programme number.
2. Press the number button(s) to select the track number to be replaced.
Press the PROGRAM button to quit the programme mode screen.
3
3/5
Program Mode
All Clear
1 03 6 -- 11 -- 16 --
2 -- 7 -- 12 -- 17 --
3 -- 8 -- 13 -- 18 --
4 -- 9 -- 14 -- 19 --
5 -- 10 -- 15 -- 20 --