Filter
Top Products
9
Need help? www.sanyoctv.com 1-800-877-5032
REMOTE CONTROL OPERATION
• MUTE Key—Mute or restore the sound.
• MENU—Displays or hides the on-screen menu.
• Cursor ▲ (UP) ▼ (DOWN) keys—Move the on-
screen cursor up and down.
• Cursor < (LEFT) > (RIGHT) keys—Move the on-
screen cursor left and right.
• ENTER Key—Set or select the highlighted option
on the screen.
• EXIT Key—Exits the on-screen menu.
• POWER Key—Turns your HDTV On or Off.
• INPUT Key—Selects the video source to view.
Holding down the key displays the Input List.
• INFO Key—Displays the Channel Information
banner.
• PIX SHAPE Key—Cycles through the available
aspect ratios. The different settings either
stretch, zoom, or fit the image on your screen.
Bars may appear on top and bottom of your
screen (or on left and right sides) depending on
the broadcasted signal or program.
NOTE: Pix6-7 are setup as Pix1-2 in PC mode. Use of
Pix6-7 in TV mode is not recommended.
• AUDIO Key—Selects the desired Audio mode.
Stereo, Mono, or SAP (when available.)
• RESET Key—Pressing it twice restores your
HDTV to its factory settings. All user customized
settings will be cleared.
• CAPTION Key—Cycles through the available
Caption modes.
• SLEEP Key—Displays the “Off” Timer. While Off
Timer is on-screen, press the “0” key to Set the
amount of time (in 30 minute increments) at
which the HDTV will turn off.
• NUMERICAL Keys—Select channels directly.
NOTE: For channels 100 and up, press and hold the
first number, then enter the remaining two numbers.
• Channel ▲▼keys—Scan through the channels
in the memory database.
• Volume
++
––
keys—Increases or decreases the
audio level.
• RECALL Key—Switch between current channel
and last selected channel.
•
––
(sub ch) key —Allows for the direct selection
of digital chanels and subchannels. For exam-
ple: to select channel 39.1 press the
3 and 9
keys followed by the dash
––
, and 1 keys.