Filter
Top Products
6
➀
Game Key (DS13320)
Press to select the program source to be
displayed on the screen: TV signal or
signal from the equipment you have
connected to the A/V jacks. The TV will
automatically change the screen and
sound to factory preset game settings.
Input Key (DS19310)
Press to select the program source to be
displayed on the screen: TV signal or
signal from the equipment you have
connected to the A/V jacks.
➁
Menu Key
Use this key with the
/ and
/ keys to navigate and adjust
features of the on-screen menu system
(see pages 7 and 8).
➂
Channel Scanning (CH / )
and Volume (VOL
/ ) Keys
Press to scan through the channels in
memory and to adjust the volume.
➃
Mute Key
Press once to lower the volume. Press
again to restore.
➄
Number Keys
Two keys must be pressed to select a
channel. Example: Press 0 then 6 to select
channel 6. For cable channels 100 through
125, press and hold the 1 key until C1––
appears. Then press the other two numbers.
➅
Caption Key (See page 10.)
➆
V-Guide Key (See pages 11 ~ 13.)
➇
Reset Key
Press this key twice to restore factory
settings. The TV will automatically start
Channel Search and clear all
customized settings (see page 8).
➈
Power Key
Press to turn TV on or off.
➉
Recall Key
Select a channel then select another
using the number keys. Press RECALL
to switch between the channels.
Display Key
Press once to display the Channel
number. Press twice to display the
channel number continuously. Press
again to remove the display.
Sleep Key
Use this key with the “0” key to set the
Sleep Timer (see page 13).
REMOTE CONTROL KEYS
➠
Point towards TV
11
12
QuickTips
■
Point the remote
control toward the
TV. Objects between
the remote control
and the TV may
cause misoperation
of remote control
function.
■
Be sure batteries are
installed correctly.
■
Cannot select channel
with number keys.
Press “0” in front of
numbers 1 ~ 9.
Example: Channel 05.
■
The “C” in front of
the number on your
screen indicates a
cable channel.
■
Adjusting the volume
level:
Right flash-
ing arrow indicates
volume is increasing
and
left flashing
arrow indicates
volume is decreasing.
■
Channel number
will not display
continuously when
captioning is on.
■
Using V-Guide
TV Parental Guide-
lines settings can be
changed only by using
the Remote Control.
(See pages 12 and 13.)
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
GAME
(INPUT)
MENU
MUTE
SLEEP
V-GUIDE
DISPLAY
CAPTION
RECALL
RESET
CH
POWER
VOL
VOL
1
2
3
4
5
6
789
0
4
5
6
789
0
1
2
3
➀
➁
➂
➃
➄
➈
➉
➆
➅
➇
11
12