Filter
Top Products
10
USING THE FRONT AUDIO/ VIDEO
INPUT JACKS (
Continued)
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1. Connect VCR Audio Out (R/L) and Video Out
❶
to the TVAudio Input (R/L)
and Video Input
❷
.
For Mono VCR (Single Audio Jack) only connect VCR Audio (L) Out to TV
Audio (L) Input.
2. Press POWER
❸
to turn on the TV. Turn on external equipment also.
3. Press the GAME (INPUT) key
❹
to select program source: TV signal or signal
from the equipment you have connected to the A/V jacks.
CH3 CH4
IN
OUT
A/V JACKS
RF
CHANNEL
R- -L
AUDIO VIDEO
R- -L
AUDIO
VIDEO
VIDEO IN
L-AUDIO-R
❶
BACK VIEW OF VCR
❷
CAMCORDER
QuickTips
■
Make sure all cable
connectors are fully
seated on jacks.
■
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW for
video.
■
A solid Blue screen
with the word Video
displayed means that
the Video/Game is
selected, but no signal
is being detected at
the Video jack.
■
Position your TV at
least 2 feet from
stereo speakers. The
magnets in the speak-
ers may affect the
picture quality.
■
Do not connect
external speakers
directly to the TV.
Need help?
visit our website at
www.sanyoctv.com
or Call 1-800-877-5032
GAME
(INPUT)
MENU RECALL
RESET
CH
POWER
VOL VOL
❹
❸
REMOTE CONTROL
USING THE AUDIO OUTPUT JACKS
CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS
1. Connect the TVAudio Out (R/L)
❶
to the Stereo Amplifier In (R/L)
❷
.
2. Press POWER to turn on the TV. Turn on external equipment also.
AUDIO
OUTPUT
R
L
UHF/VHF/CATV
75Ω
TV FRONT A/V
INPUT JACKS
❶
❷
BACK OF TV
STEREO AMPLIFIER