Sanyo DS20425 CRT Television User Manual


 
INSTALL BATTERIES AS SHOWN (2 AAA, not included)
Notes:
Do not mix old batteries with new ones or mix different types of
batteries together.
Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
MENU
MUTE
SLEEP
V-GUIDE
DISPLAY
CAPTION
RECALL
RESETINPUT
CH
POWER
VOL
VOL
1
2
3
4
5
6
789
0
4
5
6
789
0
1
2
3
REMOTE CONTROL KEYS
Input Key—Press to select the program source to
watch: TV signal or signal from DVD Player or other
equipment you have connected to the A/V jacks.
Menu Key—Use this key with the ▲▼ and – + keys
to navigate and adjust features of the on-screen menu
system. (See pages 10 ~ 12.)
Channel Scanning (CH ▲▼) and Volume
(VOL – +) Keys—Press to scan through the chan-
nels in memory and to adjust the volume.
Mute Key—Press once to suppress the volume.
Press again to restore volume to previous level.
Caption Key—(See page 12.)
V-Guide Key—(See pages 13 ~ 14.)
Point towards TV
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.
(Continued on page 10.
)
USING THE REMOTE CONTROL
Be sure batteries are installed correctly.
Point the remote control toward the TV. Objects between
the remote control may cause misoperation of the remote
control function.
Cannot select channel with number keys. Press “0” in
front of numbers 1~9. Example: Channel 05.
Adjusting the volume level: Flashing Right arrow
indicates volume is increasing and flashing Left arrow
indicates volume is decreasing.
9
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032