Filter
Top Products
INSTALL BATTERIES AS SHOWN (2 AAA, not included)
Notes:
– Do not mix old batteries with new ones or mix different types of
batteries together.
– Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
REMOTE CONTROL KEYS
➀
Power Key—Press to turn TV ON or OFF.
➁
Input Key—Press to select the program source to watch:
TV signal or signal from DVD Player or other equipment
you have connected to the A/V jacks.
➂
Number Keys—Press two keys to select a channel.
Example: Press 0 then 6 to select channel 6. For cable
channels 100 through 125, press and hold the 1 key until
C1–– appears. Then press the other two numbers.
➃
Caption Key—(See page 12.)
➄
Menu Key—Use this key with the ▲▼ and – + keys to
navigate and adjust features of the on-screen menu system.
(See pages 10 ~ 12.)
➅
Channel Scanning (CH ▲▼) and Volume (VOL – +)
Keys—Press to scan through the channels in memory and
to adjust the volume.
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.
(Continued on page 10.
)
USING THE REMOTE CONTROL
■
Be sure batteries are installed correctly.
■
Point the remote control toward the TV. Objects between
the remote control may cause misoperation of the remote
control function.
■
Cannot select channel with number keys. Press “0” in
front of numbers 1~9. Example: Channel 05.
■
Adjusting the volume level: Flashing Right arrow
indicates volume is increasing and flashing Left arrow
indicates volume is decreasing.
9
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
Point towards TV
➠
➁
1 2 3
4 5 6
7 8 9
0
MUTE
MENU
CAPTION SLEEP
RECALL
RESETINPUT
POWER
DISPLAY
123
456
789
0
CH
CH
VOL VOL
➂
➃
➄
➅
➀