Filter
Top Products
11
USING THE FRONT AUDIO/ VIDEO INPUT JACKS
CONNECTING A VIDEO GAME OR OTHER EXTERNAL EQUIPMENT
Switch off TV and video game before connecting cables.
1. Connect game Audio Output (R/L) to the TV Audio Input (R/L). Then connect game
Video Out to the TV Video In
❶
.
2. Press POWER key
❷
to turn on the TV
. Turn on external equipment also.
3. Press the INPUT key ❸ to select program source: TV signal or signal from the equipment
connected to the A/V jacks. Press the MENU key
❹
and select Game from the on-screen
menu. The TV screen and sound will automatically change to factory preset settings.
AS
CH VOL POWERMENU
L AUDIO RVIDEO IN
MENU
L AUDIO RVIDEO IN
❶
Video Game
RECALL
DISPLAYMUTE
MENU
CAPTION SLEEP
RESETINPUT
CH
VOL VOL
POWER
VCR TV AUX
123
456
789
0
123
456
789
0
❷
Remote Control
Camcorder
USING THE AUDIO OUTPUT JACKS
CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS
1. Connect the TV Audio Out (R/L)
❶
to the Stereo Amplifier In (R/L)
❷
.
2. Press POWER to turn on the TV. Turn on external equipment also.
AUDIO VIDEO
INPUT
R
L
UHF/VHF/CATV
75Ω
R
L
VIDEO
(MONO)
S-VIDEO
AUDIO
OUTPUT
❶
❷
Back of TV
Stereo Amplifier
QuickTips
■
Position your TV at
least 2 feet from stereo
speakers. The magnets
in the speakers may
affect the picture
quality.
■
Do not connect
external speakers
directly to the TV.
■
Make sure all cable
connectors are fully
seated on jacks.
■
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW for
video.
■
A solid Blue screen
with the words Video1
or Video2 displayed
means that the
Video/Game mode is
selected, but no signal
is being detected at the
Video jack.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
❹
❸