Filter
Top Products
ROI: OFF BASIC mode (12KB)
ROI: MAX Static ROI recording (12KB)
Use the same amount
of data …
for enhancing the picture quality
of regions of interest
Camera control (PTZ cameras & zoom
cameras only) available from the front
panel, PC or a controller
PC
Controller
Alarm Log OSD Select the month
Select the week and the day
Finally, select the time of
images that need to be reviewed
Select the ALARM SEARCH
or ALARM THUMBNAIL SEARCH
PTZ Camera
ROI (Region of Interest)
ROI is one of the advanced features included in the
JPEG2000 compression method. By setting ROI, it is
possible to apply better picture quality for particular areas
preset on the screen.
The ROI area setting is up to the user.
Camera Telemetry Control
The DSR-5716P / DSR-5709P are capable of controlling PTZ
dome cameras and zoom cameras through coaxial cables or
RS-485. It also allows this control from a network PC or a
controller. The unit also supports protocols of other major
brands.
Camera with no Alarm Input Controlled by an External
Alarm
Through this unit, an external alarm can prompt PTZ cameras
such as VCC-9500P / VCC-9600P / VCC-9700P / VCC-9800P
to return to preset positions and perform other operations.
There are four operations available — PRESET, TOUR, AUTO
PAN and SEQUENCE.
* This control is activated only when the setting of alarm
recording is ON and the setting of alarm trigger is the external alarm.
Built-in VGA (1024 x 768 pixels) Terminal
The VGA terminal allows direct connection to a PC monitor,
which can then be used to monitor surveillance video. It also
enables remote terminals to replay video with VGA quality,
thus improving the thoroughness of monitoring.
Supports up to 2TB HDD
The unit has two HDD bays, each supporting up to 2TB HDD
to make the unit the right choice in today’s trend for bigger
drives. Selecting a drive of the same capacity will allow the
use of the mirroring* function for data backup.
For the latest available range of optional drives, contact the
place of purchase.
*
Mirror Recording
DSR-5716P / DSR-5709P each comes with two HDD bays. With two
HDDs of the same capacity installed, it is possible to record the same
video on two HDDs, thus allowing for a backup.
Alarm Log Search
Recordings made during a particular period are shown in a
user-friendly GUI. By designating the hour, minute, month,
or day of the week of alarm events, a search is performed on
a log file to narrow the search and bring up the desired
scene.
Longer Recording Time with an Expansion Unit
The DSR-5716P or DSR-5709P with two 750 GB HDD units
(1.5TB total capacity) can, for example, be connected to
external HDD unit VA-EXH with 3 TB capacity (750 GB x 4,
using Serial ATA HDD units) to further increase its storage
capacity to a stunning 4.5 TB. This enables unprecedented
uninterrupted recording. Adding HDD units also allows
extensive storage of recorded data or data backup with
mirror recording.
* The DSR-57xxP unit with VZU-SCB1 cannot be connected to the
VA-EXH extension unit.
Multi Alarm Events Copy
Now it is possible to copy recorded video and audio directly
to external media without the use of the archive area. This
allows the user to retrieve desired video quickly.
CD-R/RW, DVD+R/+RW
The unit comes with two USB terminals located on both the
front and rear panels. Using one of these terminals, it is
possible to back-up data to CD-R/RW discs (Max. 640MB),
DVD+R/+RW (Max. 4.6GB). The use of discs ensures secure
storage of necessary video and audio data.
* Recommended products only
USB Ports
The DSR-5716P and DSR-5709P come with two USB ports,
one each on the front and rear panel. The front USB port is
handy for using USB memories, for features such as
Downloading and Uploading in the setup menu, newly added
firmware update, and downloading images. The rear port can
be used to connect VA-EXD1B, which enables the
downloading of images to a CD or DVD.
* When the front and rear USB ports are used simultaneously, the front
port is always given priority.
Pre-alarm Recording
The pre-alarm recording mode allows the user to save up to
15 minutes of video prior to an alarm input, offering a great
advantage when analyzing a situation.
Timer Recording
The timer recording mode allows the user to set eight
different settings. Different settings for each day of the
week and multiple settings for the same day are possible. It
is also possible to specify the start / stop time or use a
different recording speed.