Filter
Top Products
PREPARATION
19
Before Operation - DVD Part (Continued)
AUDIO
Each DVD disc has a variety of audio output options.
Set the player’s Audio Output according to the type of
audio system you use.
Dolby Digital
Bitstream: Select “Bitstream” if you connected the
DVD+VCR’s DIGITAL OUT jack to a Dolby Digital
decoder (or an amplifier or other equipment with a
Dolby Digital decoder).
PCM: Select when connected to a two-channel digital
stereo amplifier. DVDs encoded in Dolby Digital will be
automatically downmixed to two-channel PCM audio.
DTS
Bitstream: Select “Bitstream” if you connected the
DVD+VCR’s DIGITAL OUT jack to a DTS decoder (or
an amplifier or other equipment with a DTS decoder).
Off: If you select “Off”, the DTS signal through the DIGI-
TAL OUT jack is not outputted.
MPEG
Bitstream: Select “MPEG” if you connected the
DVD+VCR’s DIGITAL OUT jack to a MPEG decoder (or
an amplifier or other equipment with a MPEG decoder).
PCM: Select when connected to a 2-channel digital
stereo amplifier. The DVD+VCR outputs sounds in the
PCM 2ch format when you play a DVD video disc
recorded on the MPEG1, or MPEG2 recording system.
Sample Freq. (Frequency)
To change the Sample Frequency setting, first select
the desired Dolby Digital, DTS, and MPEG mode as
indicated as above.
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
made, this unit will automatically convert any 96 kHz
signals to 48 kHz, so your system can decode them.
If your receiver or amplifier is capable of handling
96 kHz signals, select 96 kHz. When this choice is
made, this unit will pass through each type of signal
without any further processing.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to “On” for this effect.
Vocal
Set Vocal to “On” only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
OTHERS
The PBC and Auto Play settings can be changed.
PBC
Set Playback Control (PBC) to “On” or “Off”.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio
CDs.
Auto Play
You can set up the DVD+VCR so a DVD disc automati-
cally starts playing whenever the DVD is inserted.
If Auto Play mode is set to “On”, this DVD+VCR will
search the title which playback time is the longest and
then play back the title automatically.
On: Auto Play function is activated.
Off: Auto Play function is not activated.
Note
The Auto Play function may not work for some DVDs.
DVD
AUDIO
Dolby Digital
Bitstream
PCM
48 kHz
Bitstream
DTS
MPEG
Sample Freq.
On
On
DRC
Vocal
Move
Select
PBC
OffAutoPlay
OTHERS
On
Move
Select