Filter
Top Products
：SEL ：ADJ ：EXIT
OSD LANGUAGE
OSD H-POSITION
OSD HALFTONE
OSD DURATION
MENU
OSD V-POSITION
15 SEC
50
44
50
SYSTEM
Selecting Input Source Signal
Press the SOURCE button to display the SOURCE menu .
11
2
VGA------Select signal from VGA (D-SUB) jack.
HDMI-------Select signal from HDMI/DVI terminals.
TV --------Select TV signal.
AV(or AV/SV)-------Select signal from AV IN or S-Video terminals.
SCART 1----Select signal from 21-PIN SCART 1 interface.
SCART2 AV-----Select signal from 21-PIN SCART 2 interface.
SCART2 YC-----Select SCART2 YC when viewing Y/C signal from 21-PIN SCART 2 interface.
YPBPR------Select signal from YPbPr terminal.
Press to select .5or6 a desired input source
Press 3 or 4 to confirm.
3
Selecting a Menu Language
Press OK button to exit the menu or press MENU button to return to the
previous menu.
5
Press MENU to display the menu main page.
1
Press repeatedly to select menu.3or4 SYSTEM
2
Press to access the menu.6
3
Press o select a
desired OSD language.
3or4t access the selection bar, and then use 3or4to
4
The [OSD LANGUAGE] item will be highlighted automatically.
VGA
H DMI
AV
SCART 1
SCART2 AV
SCART2 YC
YPBPR
SOURCE
TV
Basic Operations (continued)
Changing Channels
Using the Channel Buttons (CH+ or CH-)
Press the CH+ or CH- to change channels.
When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the unit has memorized.
You will not see channels that were skipped.
Direct Accessing Channels
Press the number buttons to go directly to a channel.
To select a one-digit channel: press the 0-9 number buttons to input the channel number, followed by OK button or wait for some
seconds, and the unit automatically goes to the selected channel .
To select a two-digit channel: press the 0-9 number buttons to input the channel number and the unit goes to the selected channel .
To select a three-digit channel: press the 0-9 number buttons to input the channel number and the unit goes to the selected channel.
When you use the number buttons, you can directly select channels that were skipped.
Note:
Using the RETURN button
Press this button to switch between the current channel and the previous channel.
15
:ADJ
Downloaded From TV-Manual.com Manuals