Filter
Top Products
Memorizing the Channels
Your LCD TV can memorize and store all of the available channels. After the available channels are memorized, use CH+/- to scan through
the channels.
16
CHANNEL LABEL
D/K
Before you start AUTO SCAN, it is necessary to select a region firstly.
Selecting a Region
Press to .3or4 select a proper region according to your area
4
Press MENU to display the menu main page.
1
Press repeatedly to select menu, and press to access.3or4 TV-CHANNEL 6
2
Press or to select item.5 6 repeatedly PROGRAM AREA
3
Press OK button to exit the menu or press MENU button to return to
the previous menu.
5
TV - CHANNEL
：SEL ：ADJ ：EXIT
COLOR SYSTEM
AUTO SCAN
AUTO
MANUAL SEARCH
B/G
MENU
OTHER
PROGRAM AREA
SOUND SYSTEM
CHANNEL LABEL
Searching Channels Automatically
Press 3 to .
.
or4 begin the auto channel search
The unit will begin memorizing all of the available channels.
If there is any channel locked, you must first input your password to
perform the auto channel search
Note: During the process of the Auto Scan, you can press OK or MENU button to
stop the search.
1
Navigate to the TV-CHANNEL menu, and highlight AUTO SCAN item.
2
TV - CHANNEL
：SEL ：ADJ ：EXIT
COLOR SYSTEM
SOUND SYSTEM
AUTO SCAN
MANUAL SEARCH
CHANNEL LABEL
AUTO
MENU
OTHER
PROGRAM AREA
B/G
If there is any channel locked, you cannot access the manual search submenu unless you
input the correct password.
After the Manual Search, you can press OK button to exit the menu or press MENU button
to return to the previous menu.
Searching Channels Manually
Press or to select FREQUENCY item. You may press 0-9 number buttons
to input a frequency directly or press 3 or 4 to search program from current
frequency.
5 6
Use 0-9 number buttons to directly select a channel that you want to perform
manual search.
1
3
Press to access the next level menu.4
4
Press 4, the set searches towards higher frequency.
Press 3, the set searches towards lower frequency.
Use Manual Search if desired channels can not be memorized or if you would
like to store programs to specific channel numbers one by one.
TV - CHANNEL
：SEL ：ADJ ：EXIT
COLOR SYSTEM
SOUND SYSTEM
AUTO SCAN
MANUAL SEARCH
CHANNEL LABEL
AUTO
B/G
MENU
OTHER
PROGRAM AREA
TV - CHANNEL
：SEL ：ADJ ：EXIT
CURRENT CH
SKIP
EXCHANGE
AFC
FINE TUNING
1
OFF
MENU
1
TARGET CH
FREQUENCY
OFF
043.70 MHZ
50
To search program manually from current frequency:
The search stops when a program is found and this program will be stored in current channel.
To search program manually by inputting a frequency:
1. Highlight the FREQUENCY item, the unit allows you to input a frequency.
2. Input the desired frequency by using 0~9 number buttons, then the unit locates
to your frequency.
- or -- or -
Navigate to the TV-CHANNEL menu, and highlight MANUAL SEARCH item.
2
Downloaded From TV-Manual.com Manuals