Filter
Top Products
10
Note:
<The unit receives CVBS (VIDEO) signal and Y/C (S-VIDEO) signal from SCART2 interface.
<When receiving Y/C signal, you need to select SCART 2 YC instead of SCART 2 AV in the source select menu. Therefore, if
you find that the colour is not properly displayed, please try to select SCART 2 YC.
<To connect to external devices with AV terminals, you may use 21-pin Scart Converter to connect to SCART interface on the
unit, then please select SCART 2 AV and the unit receives CVBS (VIDEO) signal only.
Connect a VCR
Connect the SCART Cable between the unit and the VCR.
How to connect:
1. Turn on your LCD TV , press SOURCE button on the remote control.
2. Use 5 or 6 repeatedly to select SCART2 AV and press or to confirm.
3. Turn on your VCR , insert a videotape and press the Play button.
3 4
To play VCR
-
SVIDEO
AV IN
Rear of the VCR
VCR
RL
VIDEO
AUDIO
21-pin SCART
connector
SCART Cable
SCART
Connections (continued)
VGA
H DMI
TV
AV
SCART2 AV
SCART2 YC
YPBPR
SOURCE
SCART 1
:ADJ
Downloaded From TV-Manual.com Manuals