Filter
Top Products
CONNECTIONS
Connect the video camera and TV monitor as shown in the figure below.
NOTE:
Before making the connections, make sure the devices are disconnected from the power outlet.
Video camera
(sold separately)
TV Monitor (sold separately)
Coaxial
cable
(sold
separately)
To
VIDEO
IN
jack
AUDIO VIDEO
OUT
OUT
IN
IN
REMOTE
OPEN COLLECTOR
ALARM IN SERIES IN
COM
CLOCK OUT
CLOCK IN EJECT IN WARNING OUT 1 TAPE END
(
SERIES
)
OUT 2
EJECT OUT
1=500mA(Max.)
2= 50mA(Max.)
AC IN
PUSH
OPEN
To
VIDEO
OUT
jack
From an external
audio source
To remote control
(sold separately)
MIC IN
Power cord
To outlet
Power Cord Installation
1
Plug the supplied power cord firmly into the AC
power input AC IN ~ socket.
2
Insert the plug of this power cord into a outlet.
NOTES:
œ The grounded power cord (3-pin plug) must be
connected to a grounded power outlet.
œ For more details, please refer to the manuals
accompanying all other devices. If the connections
are not made properly, it may cause a fire or damage
the equipment.
œ You can use a VA-RMN01 Remote Control Unit (sold
separately) to control the VCR remotely.
œ If there is no video signal when the power is turned
on, “NO VIDEO” will be displayed on-screen.
NF4Q/NA2 (SRC-800A GB) Tue. Sept., 10/2002
8
English