Filter
Top Products
- 13 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Rear View Connections
1.
SPDIF - This connection port is used for sending out digital audio signals
to digital surround sound receivers. The orange (COAX SPDIF OUT)
connector sends out either bit-stream or PCM digital sound signal to a
home theater receiver with digital coax input.
2. TV – This connection is for digital or analog cable without the cable box
or over-the-airwave antennas. The tuner is a hybrid tuner that tunes to
both analog and digital channels. This connection uses coaxial RF cable.
For over-the airwave digital stations please check
http://www.antennaweb.org
.
3. VGA - This connection port connects to a PC for video using VGA cable.
Be sure to connect your audio cable to the VGA Stereo input if you want
sound out of VGA video source.
4. Audio In - This connection port is for people who want to provide audio to
the TV when using a PC or a DVI video device. The sources use 3.5mm
mini-jack audio cable.
5. HDMI1-3 – HDMI connects to devices that use HDMI cable, such as Blu-
ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video device
for video.
6. USB – USB connects to USB flash drives for playing music and picture.
The USB port is also used for updating the TV’s firmware.