Filter
Top Products
- 13 -
www.SCEPTRE.com
SCEPTRE X50 HDTV User Manual
tunes to both analog and digital channels. This connection uses
coaxial RF cable. For over-the airwave digital stations please check
http://www.antennaweb.org.
3. VGA - This connection port connects to a PC for video using VGA
cable. Be sure to connect your audio cable to the VGA Stereo input if
you want sound out of VGA video source.
4. Audio In - This connection port is for people who want to provide
audio to the TV when using a PC or a DVI video device. The sources
use 3.5mm mini-jack audio cable.
5. Video – Video connects to devices that use composite video cables
such as VCR or DVD player or Wii™. Connect the yellow for video
and the red / white for audio. This port shares the audio jacks
with YPbPr.
6. YPbPr – This connection port is for DVD players or satellite / cable
set-top boxes that use component cables. From left to right, connect
green, blue, and red for video, and then connect white for left
channel audio, and red for right channel audio. This port shares the
audio jacks with Video.
7. HDMI1-3 – HDMI connects to devices that use HDMI cable, such as
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video.
8. Analog Audio Out – This connection is for connecting to analog
audio receivers.
9. HEADPHONE – This connection is for headphones to be attached to
the TV.
10. USB – USB connects to USB flash drives for playing music and
picture. The USB port is also used for updating the TV’s firmware.
Please Note:
This TV features a power saving function which will turn off the
TV automatically after 10 minutes of idling on a connection with
no signal. This feature is present on all connection.