Filter
Top Products
SCEPTRE X195 HDTV User Manual
- 21 -
www.SCEPTRE.com
OSD (On Screen Display)
Controls
Via Remote Control
In order to adjust most of the options inside the On Screen Display (OSD), the picture below shows
all the buttons used on the remote control.
– This button opens the
OSD and also exits the OSD
by going to the previous
level of the OSD.
– This button exits the OSD
entirely.
▲ – This button changes the channel to a
higher number and also functions as up
direction in the OSD.
▼ – This button changes the channel to a
lower number and also functions as down
direction in the OSD.
◄ – This button decreases the volume and
also functions as left direction in the OSD.
► – This button increases the volume and
also functions as right direction in the OSD.
↵ – This button changes the channel in
conjunction with the number pad and also
functions as enter for selecting options in
the OSD.
Via TV Side Panel Buttons
In order to provide more than one type of OSD control buttons, the side panel’s buttons
have also been made functional for adjusting the OSD.
1. POWER – This button is not used under the OSD.
2. SOURCE – When the OSD is active, this button acts as the enter button and confirms the
menu selection.
3. MENU – This button activates the On Screen Display (OSD). If a sub-menu is active, pressing
this button will return selection to the previous menu level.
4. CH ▼– If the OSD is active, this button functions as down control for the menu.
5. CH▲ –If the OSD is active, this button functions as up control for the menu.
6. VOL(–) – If a OSD is active, pressing this button will move the selection to the left.
7. VOL(+) – If a OSD is active, pressing this button will move the selection to the right.