Filter
Top Products
Explorer
®
2300™ Interactive Set-Top Quick Reference
0003B4287797
SABDQXTL N0006246618
1098234 5 761
T11500
2300 Back Panel
1 IR This connector is reserved for future use.
2 S-Video Out Connects an S-Video cable to send an S-Video
signal to your TV or VCR. This signal is
standard definition (SD) but higher quality than
other SDTV connections.
3 Digital Audio Connects RCA cables to send a digital audio
Out signal to a surround-sound receiver or other
digital audio device.
4 Video Out Connects to the video input of your TV or VCR.
5 Audio Out (L/R) Connects RCA cables to Audio Out to send
analog audio signals (left and right) to a stereo
receiver or TV with stereo outputs.
6 Cable Out Connects a coaxial cable to send analog audio and video signals to a TV or VCR. These signals are SDTV video and
monaural audio.
7 Cable In Connects the coaxial cable that delivers the signal from your cable service provider.
8 BYPASS Contact your cable service provider for more information.
9 AC Outlet Connects the AC power cord from another device, such as a TV.
10 AC Power Input Connects the power cord to deliver power to the set-top.
Safety First
Before using this set-top, read the Important Safety Instructions section
of this quick reference. Follow the instructions to install the set-top, to
become familiar with the buttons on the front panel, and to access your
cable services. Then, enjoy the features of this set-top!
Explorer eClub
(www.scientificatlanta.com/explorerclub)
Access the online Explorer eClub for more information about this set-top
and see additional connection diagrams. On the Explorer eClub site you
can also get “how to” tips on using this set-top, such as setting up your
favorite channels, blocking programs that are inappropriate for children,
and using the remote control to turn on more than one of your electronic
devices. There is also a section with answers to frequently asked questions.
To join and access the online Explorer eClub enter the model number shown
on the front panel of this set-top.
Set-Top Serial Number
If this set-top requires troubleshooting in the future, your cable service
provider may ask for the serial number. The serial number is on the back
panel; it begins with “SA” and is located in the lower left corner of the bar
code. Use the space provided here to record the serial number.
Safety and Performance Tips
• Keep the top of the set-top
free of all objects and electronic
devices, including your TV.
• Always set the set-top on its feet,
never on its side.
Checking Product Safety
Upon completion of any service or repairs to this product, the service
technician must perform safety checks to determine that this product is in
proper operating condition.
Outdoor Grounding System
If this product connects to an outdoor antenna or cable system, be sure
the antenna or cable system is grounded (earthed). This provides some
protection against voltage surges and built-up static charges.
Article 810 of the National Electric Code (NEC) ANSI/NFPA
No. 70-1990, provides the following information:
• Grounding of the mast and supporting structure
• Grounding the lead-in wire to an antenna discharge unit
• Size of the grounding conductors
• Location of the antenna-discharge unit
• Connection to grounding electrodes
• Requirements for the grounding electrodes (see the following
antenna grounding diagram as recommended by NEC
ANSI/NFPA 70)
IMPORTANT SAFETY INSTRUCTIONS, continued
United States FCC Compliance
Note: This device has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against such
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment OFF and ON, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the cable company or an experienced radio/television
technician for help.
Obtaining Service for Product Damage
For damage that requires service, unplug this product from the AC outlet.
Then, contact your cable service provider or qualified service personnel
to obtain service for the following conditions:
• If there is damage to the power-supply cord or plug
• If liquid enters this product
• If you expose this product to rain or water
• If you drop this product, a heavy object falls on this product, or damage
occurs to the cover of this product
• If this product does not operate normally by following the operating
instructions
• If this product exhibits a distinct change in performance
Lightning
For added protection for this product during a lightning storm, or when it is
left unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges. Plugging this
product into a surge protector may reduce the risk of damage.
Note: Unplugging this product for an extended period of time can result in
loss of authorization. For reauthorization, contact your cable service
provider.
Power Lines
WARNING: To avoid electric shock, do not locate an outside
antenna system in the vicinity of overhead power lines or power
circuits.
Do not locate an outside antenna system in the vicinity of overhead power
lines or power circuits. When installing an outside antenna system, take
extreme care to keep from touching power lines or circuits, as contact might
be fatal. 20050719STBD
Any changes or modifications not expressly approved by Scientific-Atlanta
could void the user’s authority to operate the equipment.
The information shown in the FCC Declaration of Conformity paragraph
below is a requirement of the FCC and is intended to supply you with
information regarding the FCC approval of this device. The phone number
listed is for FCC-related questions only and not intended for questions
regarding the connection or operation for this device. Please contact your
cable service provider for any questions you may have regarding the
operation or installation of this device.
FCC Declaration of Conformity
This device complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions: 1) the device may not cause harmful interference,
and 2) the device must accept any interference received, including
interference that may cause undesired operation.
Explorer 2300 Interactive Set-Top
Model: Explorer 2300
Scientific-Atlanta, Inc., 5030 Sugarloaf Parkway
Lawrenceville, Georgia 30044 USA
Telephone: 770-236-1077
Canada EMI Regulation
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la class B est conforme à la norme NMB-003 du
Canada.
Trademarks
Scientific-Atlanta, the Scientific-Atlanta logo, and Explorer are registered
trademarks of Scientific-Atlanta, Inc. 2300 is a trademark of
Scientific-Atlanta, Inc.
Disclaimer
Scientific-Atlanta, Inc. assumes no responsibility for errors or omissions that
may appear in this guide. Scientific-Atlanta reserves the right to change this
guide at any time without notice.
© 2005 by Scientific-Atlanta, Inc. All rights reserved.
Product and service availability subject to change
without notice.
Scientific-Atlanta, Inc., 5030 Sugarloaf Parkway,
P.O. Box 465447, Lawrenceville, GA 30042
www.scientificatlanta.com
October 2005 Printed in the United States of America
4012619 Rev A
Software and Firmware Use
Scientific-Atlanta, Inc. owns copyrights to the software described in this
document and furnishes the software to you under a license agreement.
You may only use or copy this software in accordance with the terms of
your license agreement.
Scientific-Atlanta, Inc. owns copyrights to the firmware in this equipment.
You may only use the firmware in the equipment in which it is provided. Any
reproduction or distribution of this firmware, or any portion of it, without the
express written consent of Scientific-Atlanta, Inc. is prohibited.
1 Power Turns the set-top on and off
2 VOL +, VOL - Increases and decreases the volume
3 CH +, CH - Scrolls up and down through the channels
4 Select Provides access to your on-screen
selection
5 IR Sensor Receives the infrared signal from the
remote control
6 LED Display Displays the selected channel number
and time of day. The LED also displays
the following:
• Message (
)
• Power ( )
7 Guide Accesses on-screen services, such as the on-screen guide, video-on-demand, or pay-per-view
8 Info Displays a description of the selected program. This button is available from the on-screen guide
and while viewing a program
9 Exit Exits menus, on-screen guide, and program information
10 Settings Accesses the Settings menu
11 Smart Card Allows smart card access (May not be available on all models.)
12 USB Connects to external equipment, such as a keyboard
2300 Front Panel