Filter
Top Products
5
Connecting the Set-Top
To connect your set-top to your entertainment devices, complete these steps.
!
3
1
2
4
5
Do not turn on the set-top or TV yet.
POWER
6
7
Identify the additional devices you
will connect to the set-top and TV.
See the Connection Diagrams
section of this guide.
Wait several minutes for the set-top to receive the latest software, programming, and
service information. One of the following will display on the front panel of the set-top:
• Current time • Four dashes (----)
Notes: - If the current time appears, the update is complete.
- If four dashes appear, you must call your service provider to get the
set-top authorized.
Connect the coaxial cable that carries the signal from your cable service provider to
the CABLE IN connector on the back panel of the set-top.
Connect your SDTV to the set-top. See the Connection Diagrams section of this
guide.
Plug the set-top and the TV into an AC power source.
Important: To protect the set-top from power surge damage, ground (earth) your
cable product to provide some protection against voltage surges and built-up static
charges. To avoid these voltage surges that can be caused by lightning storms and
power outages, plug the set-top into a surge protector to reduce the risk of damage.
To begin watching TV, turn the TV on, and press POWER on the front panel of the
set-top or on the remote control.
DVD
Home Theater
VCR
Other