Sears 274.4372859 CRT Television User Manual


 
Using Your TV and Remote
With VCRs: Setting the VCR 1 Channel
The VCR 1 Channel works with the VCR1 button on the remote. If the
VCR 1 Channel is set, pressing VCR selects the channel to see the VCR
picture. The VCR 1 Channel setting depends on which diagram you have
used from the Connection Guide. If you want to turn this feature off, set
the VCR 1 Channel to Disable. Refer to the chart below for your setting.
1. Select the Setup Menu
Controls Alarm
13
A. Press TV to set the remote to
control the TV.
B. Press MENUopFiOG to select the
Setup menu. This menu is
white.
2. Highlight VCR1 Channel 13
Controls Alarm Ad
A. Press MOVE to highlight the
VCR 1 Channel.
B. Press MOVE b"to highlight the
channel.
3. Enter channel number
;ontrols Alarm Ad
13
Enter channel 00, 03, or 04. Choose
your setting from the chart below.
Press MOVE until "Disabled" is
displayed to turn the feature off.
Diagram used from the
Connection Guide:
1B, 1C, 2B, 2C, 3B, 3C, 4C, 5C 00
4B, 5B 3 or 4 (same as 3/4 switch)
Set VCR 1 Channel to:
9