Filter
Top Products
Using Your TV and Remote
With VCR: Setting the VCR1 Channel
The VCR 1 Channel works with the VCR1 button on the remote. If the
VCR 1 Channel is set, pressing VCR selects the channel to see the VCR
picture. The VCR 1 Channel setting depends on which diagram you have
used from the Connection Guide. If you want to turn this feature off, set
the VCR 1 Channel to Disable. Refer to the chart below for your setting.
1. Select the Setup Menu
Controls Alarm Ad
I tm
13
A. Press TV to set the remote to
control the TV.
B. Press MENU.PROG to select the
Setup menu. This menu is
white.
2. Highlight VCR 1
Channel
Controls Alarm Ad
A. Press MOVE • to highlight the
VCR 1 Channel.
B. Press MOVE • to highlight the
channel.
3. Enter channel number
Controls Alarm Ad
13
Enter channel 00, 03, or 04. Choose
your setting from the chart below.
Press MOVE • until "Disabled" is
displayed to turn the feature off.
Diagram used from the _i
Connection Guide: ;i Set VCR1 Channel to: i_
.............1K i€I 2BI 2€I 3B' 3€I 4c, 5c ...... 00 .............................. k
4B, 5B 3 or 4 (same as 3/4 switch) i