Sears 46L5200U Flat Panel Television User Manual


 
120
Chapter 8
Troubleshooting
General troubleshooting
Before calling a service technician, review this chapter or visit the
Toshiba technical support Web site at support.toshiba.com for
possible causes/solutions for the problem you are experiencing.
Before you begin to troubleshoot any problem, first unplug the TV
from the AC wall outlet, wait approximately one minute, and then
plug the TV back into the AC wall outlet. If the problem still exists
attempt to troubleshoot the problem.
Black box on-screen.
The closed caption feature is set to one of the Text modes (T1, T2,
T3, or T4). Set the closed caption feature to Off, see “Using closed
captions” on page 80.
TV stops responding to controls.
If the TV stops responding to the buttons on the remote control or
TV control panel and you cannot turn off the TV, press and hold
POWER button on the TV control panel for several seconds to
reset the TV. If the TV does not power off using this method,
unplug the TV from the AC wall outlet and plug it back in.
If you cause a static discharge when touching the TV and the TV
fails to function, simply unplug the TV from the AC outlet and plug
it back in. The TV should return to normal operation.