Filter
Top Products
- 29 - EN
1C29
INDEX SEARCH
This feature provides a method of indexing the start-
ing point so that it can be easily returned to in either
fast forward or rewind mode.
•
The index mark will be made automatically when
the REC button is pressed. It will also be marked at
the starting point of Timer recording and OTR.
•
The index mark will not be recorded if the PAUSE
button is pressed and released during recording.
•
The time gap between making the index marks on
the tape should be greater than 1 minute for SP
recording, 2 minutes for LP recording and 3 min-
utes for SLP recording.
•
In some cases, the index mark at the beginning of
video tape cannot be detected.
Example: You are watching program number 4 and
want to fast forward to program number 7. You
must skip three programs.
1 Select “INDEX SEARCH”
Press the SETUP button on the
remote control.
Press the Arrow K or L button to
point to “INDEX SEARCH”. Then,
press the Arrow Bbutton
2 Enter your desired number
Press the Arrow K or L button until
the number of programs that you
want to skip appears.
(Example: “03” for 3 programs)
•
The Index Search mode will be
canceled if the procedures are not activated in 30
seconds.
3 Begin Index Search
Press the Arrow s or B button. The TV/DVD/VHS
begins rewinding or fast forwarding to the beginning
of desired program.
NOTE: Every time an index signal is skipped, the
number in the program indicator decreases by one.
4 After Index Search
When the preset program is reached, the
TV/DVD/VHS will start playback automatically.
•
A video cassette must be inserted in the
TV/DVD/VHS for this function to work.
•
The number of Index Searches can be set up to 20.
•
This function will not operate in the recording mode.
•
When you want to cancel the Index Search while
in progress, press the STOP button.
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7
4321123
End of tape
Beginning of tape
CURRENT PLAYBACK PROGRAM
INDEX MARK
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
B INDEX SEARCH
INDEX SEACH
0 3
SPECIAL FEATURES
REAL TIME TAPE COUNTER
This shows the elapsed recording or playback time in
hours, minutes, and seconds. (The displayed time will
not change on a blank tape or blank portions on the
tape.)The “–” indication will appear when the tape has
rewound further than “0:00:00” on the tape counter.
AUTO REWIND-EJECT
•
When the end of a tape is reached during record-
ing, playback, or fast-forward, the tape will auto-
matically rewind to the beginning. After rewinding
finishes, the TV/DVD/VHS will eject the tape and
turn itself to off.
•
This function is operative when Repeat Play is set
to the [OFF] position.
•
The tape will not auto-rewind during timer record-
ing or One Touch Recording.
TD530/601_01-36 02.4.5 6:33 PM Page 29