Filter
Top Products
PREPARATION
9
STAND INSTRUCTION
■
Image shown may differ from your TV.
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
Assemble the TV as shown.
1
2
Install the 4 screws securely using the holes in
the back of the TV.
3
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
1
Loose the screws from the TV.
2
Detach the stand from the TV.
3
After removing the stand, install the included
pprrootteeccttiioonn ccoovveerr
over the hole for the stand.
Press the
PPRROOTTEECCTTIIOONN CCOOVVEERR
into the TV
until you hear it click.
Protection Cover
GG
When assembling the desk type stand, check
whether the screw is fully tightened. (If not
tightened fully, the product can tilt forward after
the product installation). If you tighten the
screw with excessive force, the screw can deviate
from abrasion of the tightening part of the screw.
NOTE
!
Installation
Detachment
GG
When assembling the stand, make sure to distinguish
and assemble the front and rear side of the stand
correctly.
FRONT
Z42PQ20-U 9/21/09 2:51 PM Page 9