Sharp 13N-M150 CRT Television User Manual


 
24
LANG GEUA
BL E NSCREEU
CH SETT ING
:OFF
BL EUSCREEN
:ON
BL EUSCREEN
L BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not
received.
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “SET
UP”.
3 Press
VOL (+)
or
(–)
to access SET UP mode.
4 Press
VOL (+)
or
(–)
to access BLUE SCREEN select mode.
5 Press
VOL (+)
or
(–)
to select “ON”.
6 Press
MENU
to exit.
Note:
Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN “OFF”.
While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the
BLUE SCREEN is turned on.
(MAIN MENU screen)
Set Up (Continued)
(SET UP mode)
(BLUE SCREEN select mode)
SL EP TIMER
SET UP
E
VIDEO ADJUST
CAPTIONCLOSED
CONTROLPARENT
ENERGY SAVE
2.4 Press
MENU
to exit.
Note:
If you press
VOL (+)
again while in the CH SEARCH mode, auto-program will start again, and the
previously memorized channels will be lost.
D+:
AIR
C
H MEMORY
ADTO
2
1
E–:
AIR
CH MEMORY
ESTO AR
21
VOL (+)
To add channel 12 to
the TV memory
VOL (–)
To erase channel 12 from
the TV memory
(CH MEMORY
memorized channel)
(CH MEMORY
unmemorized channel)
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
23-25 13N-M100/150[B].p65e 31/07/2000, 11:52 PM24