Sharp 32F543 CRT Television User Manual


 
Dimension: 140 X 215 mm
Saving broadcast TV channels into memory
1 Press MENU to access the MAIN MENU
screen, then press CH a/s to move the “E
mark to “SET UP”.
2 Press VOL k/l to access the SET UP
screen, then press CH a/s to move the “E
mark to “CH SETTING”.
3 PressVOL k/l to access the CH SETTING
screen.
4 PressCH a/s to move the “E” mark to “CH
SEARCH”, then press VOL k/l to access
the CH SEARCH screen.
To start:
Press VOL k. The tuner will search through
all available channels in your area and add
them into the TV memory.
To stop:
Press VOL l. CH SEARCH will stop at the
current channel and will not add any higher
channels.
5 Press MENU to exit.
Note:
If you press VOL k again while in the CH SEARCH mode, auto-
program will start again, and the previously memorized channels will
be lost.
Adding weak or additional channels or erasing unwanted channels from TV memory
1 Press MENU to access the MAIN MENU
screen, then press CH a/s to move the “E
mark to “SET UP”.
2 Press VOL k/l to access the SET UP
screen, then press CH a/s to move the “E
mark to “CH SETTING”.
3 PressVOL k/l to access the CH SETTING
screen.
4 PressCH a/s to move the “E” mark to “CH
MEMORY”, then press VOL k/l to access
the CH MEMORY screen.
5 Use CH a/s or REMOTE KEYPAD to select
each desired channel to add or erase.
(CH SETTING screen)
(CH SETTING screen)
(CH SEARCH screen)
(START)
(STOP)
or
Set Up (Continued)
(CH MEMORY screen)
VOL
VOL
+
CH
CH
AIR/CABLE
CH SEARCH
CH MEMORY
EZ SETUP
CH SETT ING
STOP START
CH SEARCH
AIR 10
AIR/CABLE
CH SEARCH
CH MEMORY
EZ SETUP
CH SETT ING
CH
AIR
ERASE ADD
10
MEMORY
CH
CH
VOL
VOL
+
CH
CH
VOL
+
VOL
VOL
VOL
+
321
654
987
100
0
ENTER
CH
CH
VOL
VOL
+
CH
CH
CH
CH
VOL
VOL
+
CH
CH
VOL
VOL
+
27F543 30
30