Filter
Top Products
9
Dimension: 140mm x 215mm
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark
display on the remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
• The TV set and remote control illustrations and the on-screen displays in this manual may differ from
their actual appearance.
1 2 3
4 5 6
7 8 9
0
POWER
TV
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV • CATV • VCR • DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD
VCR
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD (0 – 9)
Sets the channel.
FLASHBACK
Returns to previous channel.
•
(DOT)
Sets the channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 38, 39.)
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
• Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, signals sent will
be for TV and VCR control.
In CATV/DVD position, signals sent
will be for cable TV converter and
DVD control.
DVD/VCR CONTROL
See page 47.
Infrared Transmitter Window
DISPLAY
Press → Displays receiving channel
for 4 seconds.
Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press → Switches to external video
INPUT 1 mode.
Press twice → Switches to external
video INPUT 2 mode.
Press 3 times → Switches to external
video INPUT 3 mode or
COMPONENT mode.
Press 4 times → Switches back to
the original TV mode. See page 45.
ENTER
• Used to confirm the channel
selection and Personal Preference
channel.
• Used in some instances where a
Cable Converter Box requires an
“enter” command after selecting
channels, when using the REMOTE
KEYPAD button. See page 47.
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
• See pages 34–36 for Channel
Setting.
• Moves the “ E ” mark on the MENU
screens.
MUTE
Press → Mutes sound.
Press again → Restores sound.
• When sound is muted, CLOSED
CAPTION appears if available.
Basic Remote Control Functions
Quick Reference Control Operation (Continued)
27SF560(08-09).p65 26/10/05, 5:34 PM9