Filter
Top Products
- 8 -
Preparation
Place TV on a solid surface.
For ventilation, leave a space of at least 10 cm free all around
the set. To prevent any fault and unsafe situations, please do
not place any objects on top of the set.
Use this apparatus in tropical and moderate climates.
Features
Remote Control Colour Television
100 UHF / VHF / Cable channel presets
Cable Channel Compatible
Menu Driven functions
2 Euro connector Sockets
Front AV sockets
Front SVHS connector.
NICAM Stereo
Full function teletext (Fastext)
Headphone socket
Direct Channel access
APS (Automatic Programming system) Tuning
Program custom name feature
Automatic search tuning
Sleep Timer
Child lock
Blue mute on no video signals
Audio mute on no video signals
Auto switch of after 5 mins of no signal
WSS (wide screen signal decoding)
NTSC playback
Before Switching on your TV
Power connection
Important: The TV set is designed to operate on 220 -240V
AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the mains.
Aerial Connections
Connect the aerial plug to the aerial input socket located at
the back of the TV.
How to connect external equipment
See Connecting external equipment on page 18.
See the instruction manuals provided with the external de-
vices too.
Remote Control Battery Installation
Before using the TV set for the first time, install the supplied
dry batteries in the remote control.
1. With your thumb nail, pull up the slit as indicated by the
arrow to remove the battery cover.
2. Insert two batteries 1.5 V (R03 AAA size). Be sure to
match the battery +/- terminals with the +/- marks inside
the compartment.
3. Replace the battery cover.
Notes:
Remove batteries if weak or if the unit is not in use for long
periods.
Do not mix old and new batteries.
Incorrect installation of the batteries may damage the re-
mote control.
Switching the TV ON/OFF
You can operate your TV either using the remote control
handset or directly using the TV onset buttons.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the TV.
Then the TV switches itself to standby mode and the RED
LED located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a program-
me number is selected,
or,
Press Power Button and P/CH+ or -P/CH buttons on the
TV or on the remote control respectively, so the TV will
switch on and the RED Led will turn GREEN.
To switch the TV off
Press the stand-by button on the remote control, so the TV
will switch to stand-by mode and the GREEN LED will be-
come RED, or,
Press the power button located on the front of the TV.
ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-1.p65 21.01.2004, 08:288