Filter
Top Products
Basic adjustment settings
Adjusts the picture to your preference with the
following picture settings.
Press MENU to display the MENU screen, and
then press _11/1_to select "Picture".
Backlight Tile screen dims The screen
brig htens
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Color For less color For more color
intensity intensity
Tint Skin tones become Skin tones become
reddish greenish
Sharpness For less sharpness For more sharpness
Press J,/Y to select a specific adjustment
item.
Press _11/_ to adjust the item to the desired
level.
Select "Advanced" and then press ENTER to set "Color
Temp.", "Black", "I/P Setting", "Film Mode", "3D-Y/C",
"Monochrome" or "Range of ()PC". See page 27.
Press MENU to exit.
For resetting all Picture adjustment items to the factory
preset values, press A/T to select "Reset", press ENTER,
press 4/I_ to select "Yes", and then press ENTER.
Automatically adjusts the brightness of the screen.
Press MENU to display the MENU screen, and
then press 41/1_ to select "Picture".
Press A/Y to select "OPC".
Press 41/1_ to select "On" or "On: Display".
Off The brightness is fixed at the value set in
"Backlight".
On Automatically adjusts
On: Display Displays the ()PC effect on the screen
while adjusting the brightness of the
screen.
Press MENU to exit.
When set to "On", the ()PC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
When set to "On: Display", OPC effect displays on the
screen while the ()PC adjusts the screen brightness.
(D- 26