Filter
Top Products
EN-4
Using the 3D Glasses
Part names
1
2
3
4
5
1 Infrared receiver
Receives an infrared signal sent from the
TV. The 3D Glasses turn off automatically
after 10 minutes if no signal is received from
the TV.
2 Power-supply terminal
This terminal is for recharging.
3 3D/2D/OFF Switch
This button switches between 2D and 3D
modes.
4 LED light
Blinks once every second when the battery
power is low.
5 Nose pad mount
The dedicated nose pad can be mounted
here.
NOTE
• Do not soil or apply stickers or other obstacles to the
infrared receiver. Doing so may block signals from the
TV and prevent the 3D Glasses from working correctly.
• Interference from other infrared communications
equipment may prevent you from viewing 3D images
correctly.
Attaching the Nose Pad
Attach either of the supplied nose pads as needed (such
as when the glasses do not fit properly). The glasses
come with a large and small nose pad.
1
1
2
Attaching the nose pad Removing the nose pad
Using the 3D Glasses
Turning On/Off the Power
Slide the switch to 3D to turn on the power.
Slide the switch to OFF to turn off the power.
NOTE
• When the battery power is low, the LED light blinks
once every second after the power is turned on.