Filter
Top Products
Quick Start Guide for BD-HP21H
Accessories
Turn on the player and TV
Note:
For HDMI output settings, refer to page 15 of the operation manual.
When connecting with a component video cable, refer to page 16 of the operation manual.
Remote control
unit
Two “AA” size
batteries
AC cord AV cable Operation
Manual
Quick start
guide
How to install the batteries
Hold in the tab on the
battery cover and pull
the cover towards the
direction of the arrow.
1 Load the two R-06 size batteries
(“AA” size, UM/SUM-3). Place
batteries with their terminals
corresponding to the m
and n indications in battery
compartment.
2 Insert the smaller tab of
the battery cover into the
opening 1, and press down
on the cover until it clicks in
place 2.
3
Connection
TV
To AC outlet
To AC IN
terminal
HDMI cable
(commercially available)
AV cable(supplied)
When connecting this player to a TV,
SHARP recommend using a HDMI
cable or AV cable (Supplied).
B (POWER)
After you have connected the AC cord to the unit, connect the AC cord
to the mains. Turn on your TV and switch to the appropriate AV input
(Refer to your TV’s operation manual). (This may be labeled HDMI/EXT/
AUX etc.)