Sharp BDHP25U Blu-ray Player User Manual


 
42
SETTINGS
Audio Video Settings
HDMI Video Out
This sets the resolution of the video output for the
HDMI terminal of this player.
Normally set to “Auto” (factory preset value).
Item
Auto, 1080p, 1080i, 720p, 480p
NOTE
• When the BD player is connected to a 1080p 24Hz
compatible TV and the “HDMI Video Out” is set to
“Auto”, 1080p 24Hz will automatically be displayed
when compatible discs are played back.
Secondary Audio
This toggles the clicking sound on the menu and
audio with secondary video in picture in picture
mode for BD-Video.
• Select “Off” when enjoying the high quality sounds of
BD-Video.
Item
On, Off
Audio Out
You can set the audio output when connecting to
SURROUND equipment.
1 This sets the audio output connected to
SURROUND equipment.
Item
HDMI Output: Select this when you connect using
HDMI OUT terminal.
Digital Output: Select this when you connect using
DIGITAL AUDIO OUT terminal (OPTICAL).
2 You can set the audio output mode for each
output terminal.
1 This sets the audio output mode for HDMI OUT
terminal when selecting “HDMI Output”.
NOTE
• When the secondary audio is set to “On”, PCM is
automatically selected as the audio output mode.
Item
Bitstream:
• Select this when connecting to HDMI equipment with
a built-in decoder for DOLBY DIGITAL, etc.
• Setting to Bitstream will output each audio signal by
Bitstream.
PCM (Surround):
• Select this when connecting to multi-channel HDMI
equipment.
• Setting to PCM (Surround) will output by LINEAR
PCM by decoding audio signals recorded in each
audio output mode such as DOLBY DIGITAL, DTS.
2 This sets the audio output mode for DIGITAL
AUDIO OUT (OPTICAL terminal) when selecting
“Digital Output”.
Item
Bitstream:
• Select this when connecting to SURROUND
equipment with a built-in decoder for DOLBY
DIGITAL, etc.
• Setting to Bitstream will output each audio signal by
Bitstream.
PCM:
• Select this when connecting to 2 channel stereo audio
equipment.
• Setting to PCM will output by converting each audio
signal into PCM 2 channel audio signal.
NOTE
• See page 54 for information on output of audio formats.