Filter
Top Products
CX68N5_16-22_EN FLE (Malaysia) Sdn. Bhd.
E 16
ENGLISH
Dimension: 176 x 250 mm
Picture adjustment
MENU
PICTURE
SOUND
FEATURE
TIMER
CH-SETTING
1 Press
MENU
to call MENU
screen.
2 Press
CH
/
CH
to
select “PICTURE”.
ON
+
10
-
10
50
0
PICTURE NR
20
WHITE TEMP
PICTURE
(STANDARD)
CONTRAST
COLOUR
BRIGHTNESS
TINT
SHARPNESS
6 Repeat steps 4 and 5 above to adjust other items.
7 Press
MENU
until normal screen appears.
• When
NORMAL
is pressed while the PICTURE menu is displayed, the setting
for the selected item is reset to the standard (factory setting) position.
• When
NORMAL
is pressed while the MENU screen is displayed and
“PICTURE” is selected, all the settings for the PICTURE items are reset to
the standard (factory setting) position.
TV
TV/VIDEO
POWER
SAVE
AV MODE
MENU
NORMAL
1
23
4
56
7
8
0
9
CH
CH
MENU
NORMAL
CH
CH
3 Press / to
display PICTURE menu.
4 Press
CH
/
CH
to
select adjustment items.
-
+
CONTRAST
50
(STANDARD)
5 Adjust using / .
• Wait for approximately three seconds
to return to PICTURE menu.
CONTRAST
Selected item Press Press
COLOUR
BRIGHTNESS
TINT -1
SHARPNESS
PICTURE NR -2
To decrease
contrast
For less colour
intensity
For less
brightness
To move tint toward
purple
For less
sharpness
To increase
contrast
For more colour
intensity
For more
brightness
To move tint toward
green
For more
sharpness
(See note below)
WHITE TEMP To more reddish
background
To more bluish
background
- +
- +
- +
- +
ON OFF
The following table lists the adjustment items shown in the PICTURE menu and how they change as you
press / .
*-1: TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV only)
*-2: Picture Noise Reduction
Noise might be generated on images when playing deteriorated video tapes or when receiving broadcasts with relatively
weak signals. In these cases, set PICTURE NR to “ON” to reduce the noise. However, when receiving good images
without noise, you can get better image quality by turning OFF this feature.