Sharp LC-13B4M/LC-15B4M/LC-20B4M Flat Panel Television User Manual


 
15
On-Screen Display Language Selection
PRESET
NORMAL
SCREEN
MENU on the LCD TV set can also
be used to select the language.
Upper control panel
1 Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than 2 seconds to display the
PRESET mode screen.
2 Press MENU (PRESET-1) twice
to display the LANGUAGE select
mode screen. Press MENU
(PRESET-1) again to change the
PRESET mode as shown below.
AUTO MANUAL LANGUAGE
3 Press CH ( )/( ) to select the
language you wish to display.
4 Press MENU (PRESET-1) to
return to the normal screen.
Note:
Instead of pressing MENU for more than
2 seconds, you can display the
LANGUAGE select mode by selecting
FEATURE
LANGUAGE on the
Menu screen.
VOL CH MENU TV/VIDEO
12
PRESET
1,2,43
MENU
SELECT:
EXIT:
ENGLISH
* In this example, the LC-20B4M
model is used. Refer to page 7
if you are using the LC-13B4M
and LC-15B4M models.
Note:
When starting PRESET after setting the
SOUND SYSTEM with MENU of the
Remote Control, the SOUND SYSTEM
for all channels are stored into memory.
Unused channels are automatically
skipped.
The Preset mode is only available in the
TV mode and cannot be operated in the
AV mode.
Sound System
Presetting the Channels (AUTO)
Automatically tunes in and presets
receivable TV stations.
Make sure the antenna cable is
properly connected.
(Auto mode screen)
12
1 Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than two seconds. The
AUTO mode screen appears.
2 Press VOL (–)/(+) (PRESET-2)
on the upper part of the LCD TV
set.
All the TV stations in your area
that can be received by the LCD
TV set are automatically preset.
3 The screen shows whatever is on
channel 1 when full auto channel
preset is finished.
Upper control panel
CH
MENU
E
TV/VIDEO
R
E
V
E
A
L
H
O
L
D
E
N
D
M
MENUSOUND
S
U
B
T
I
T
L
E
SUBPAGE
TEXT
R
O
T
A
T
E
W
I
D
E
T
CHVOL
MENU
SLEEP DIS.MODE
OKMPX
SUBTITLE END
HOLD
SUBPAGE
REVEAL
TEXTBRIGHT
TV/VIDEOPOWER
MENU
VOL CH MENU TV/VIDEO
12
PRESET