Filter
Top Products
15
EZ SETUP (WITH AUTO CLOCK SETTING)
Control section of main unit
SELECT LANGUAGE
ENGLISH
ESPAÑOL
FRANCAIS
SELECT: ENTER: EXIT:
ENTER
MENU
EZ SETUP during the First Power On
CHVOL
POW
ER
ENTER
BRIGHT
MUTE
SLEEP PIC. FLIP
AUDIO
ONLY
CC
TV/VIDEO
FLASH-
BACK
DISPLAY MENU
MAIN POWER
ENTER/
a/b
■ When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels and clock.
Please perform the following instructions before you press MAIN
POWER.
(1) Insert the batteries into the remote control. (See page 8.)
(2) Connect the antenna cable to the TV set. (See page 10.)
(3) Connect the AC adapter to the POWER INPUT terminal of the
product and plug in the AC cord to the wall outlet. (See page 11.)
MENU
EZ SETUP
ON
AUTO CLOCK
OFF
SELECT: ENTER: EXIT:
ENTER
MENU
1 Press MAIN POWER, located on
the upper side of the main unit, to
turn on the TV. The SELECT
LANGUAGE mode will be dis-
played.
2 Press a/b to select “ENGLISH”,
“ESPAÑOL (SPANISH)” or
“FRANCAIS (FRENCH)”, and press
ENTER.
3 Press a/b to select ON or OFF.
When you select ON, the TV set
will automatically memorize the
broadcasting channels.
Press ENTER to access AUTO
CLOCK mode.
4 Press a/b to select ON or OFF.
When you select ON, the TV set
will automatically search the time
signals (EDS signals), provided by
some TV stations, to adjust the
clock. The AUTO CLOCK setting
may take from several minutes to
an hour depending on the number
of channels to receive and signal
status. If you know the channel of
the EDS signal carrier (PBS or
other) in your area, select OFF and
follow the procedure in AUTO
CLOCK Setting. (See pages 17,
18)
5 Press ENTER to access EZ
SETUP mode.
EZ SETUP
CH-SETTING
ON
OFF
SELECT: ENTER: EXIT:
ENTER
MENU
A
• If you select OFF in “EZ SETUP CH-SETTING”, EZ SETUP will be canceled.
LC-13/15/20S1U(Mex)(E)-b 03.12.15, 2:17 PM15