Sharp LC-15B2U Flat Panel Television User Manual


 
10
PREPARATION (Continued)
A. Combination VHF/UHF Antenna
OUTDOOR ANTENNA CONNECTION
Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antennas.
Connect the outdoor antenna cable lead-in to the ANT. terminal on the rear of the TV set.
B. Separate VHF and/or
UHF Antennas
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
1. A 75-ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (not supplied).
2. A 300-ohm system is a flat twin-lead cable that can be
attached to a 75-ohm terminal through a 300-75-ohm
adapter (not supplied).
Antenna Connection (Continued)
The antenna requirements for good color television reception are more important than those for black & white
television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna
systems.
To antenna input
terminal
Antenna cable (supplied)
V
O
L
C
HM
E
N
U
T
V
/V
ID
E
O
M
A
IN
P
O
W
E
R
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF
antenna
VHF/UHF
antenna
300/75-ohm
adapter
(not supplied)
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm
coaxial cable
IN OUT
VHF
antenna
UHF
antenna
Combiner
(not supplied)
or
or
ANTENNAS
LC-15B2U-GBpp01-18 01.7.23, 11:52 AM10