Filter
Top Products
ENTER
: Select : Enter
MENU
: End
RETURN
: Back
w
Using the control panel of the TV
You can also operate the Menu using the control panel
of the TV.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
NOTE
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
About Menu operations
TV control panel buttons Remote control buttons
TV/VIDEO ENTER
CH
r a
CH
s b
VOL
kd
VOL
lc
14
MENU
[
Picture
]
Picture Audio Power Control Setup
Contrast
OPC
STANDARD
[Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[ 30]
[ 0]
[ 0]
[ 0]
[ 0]
Backlight [+16]
+
+
+
+
Preparation
Basic Menu operations
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
What is Menu?
• You need to bring up the On-Screen Display to perform
settings for the TV. The On-Screen Display for the settings
is called “Menu”.
• The Menu enables various settings and adjustments. (See
page 15.)
• The Menu can be operated with the remote control unit.
Press MENU and the MENU screen displays.
Press
c
/
d
to select the desired menu, and
then press ENTER.
Press
a
/
b
to select the desired menu item.
Press ENTER to proceed if necessary.
1
2
3
Press EXIT or MENU to exit the MENU.
Press RETURN as necessary to return to the
previous MENUs.
5
Press
a
/
b
or
c
/
d
to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
4
About Guide Display
The Guide Display at the bottom of the screen shows
operations with an On-Screen Display.
Audio
Treble
Bass
Balance
Sound Wide
Reset
[ 0]
[ 0]
-
L
+
[ 0] -
+
R
STANDARD
Power Control
Audio
Treble
Bass
Balance
Sound Wide
Reset
[ 0]
[ 0]
-
L
+
[ 0] -
+
R
STANDARD
Power Control
19A35X_en_c.indd 1419A35X_en_c.indd 14 2008-2-29 10:07:492008-2-29 10:07:49