Filter
Top Products
6
Part names
TV (Front)
OPC/Remote control sensor
POWER indicator
Light off Power off
Lighted (Red) The TV is in standby mode.
Lighted (Green) The TV is on.
TV (Rear)
1
2
3
4
5
6
7
8
9
10
14
11
12
13
***
15
16
17
1 POWER (On/Off) button
2 MENU button
3 TV/VIDEO button
4 Channel up (
r
)/down (
s
) buttons
5 Volume up (
e
)/down (
f
) buttons
6 RS-232C terminal
7 DIGITAL AUDIO OUTPUT terminal
8 INPUT 7 (PC) terminals*
9 INPUT 1 (HDMI) terminal*
10 Antenna input terminal
11 INPUT 4 terminals
12 INPUT 5 terminals
13 INPUT 6 terminals
14 INPUT 2 (HDMI) terminals
15 SERVICE ONLY terminal**
16 INPUT 3 (HDMI) terminals
17 Headphone jack
* The INPUT 1 and INPUT 7 terminals can both use the same analogue audio input terminal. However, the proper item must be
selected in the “PC audio select” menu. (See page 14.)
** Usually do not connect anything to this terminal as it is reserved only for service personnel.
*** These holes do not use for set up Wall mount bracket and Protection against overturning.
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
Regarding the headphone jack
• Use headphones with a stereo mini plug ( 3.5 mm).
• Be sure to unplug headphones from the jack when they are not
in use.
• The speakers do not output volume when headphones are
plugged in.
• The “Audio” menu cannot be operated when headphones are
plugged in.
Volume display when headphones are plugged in
20
LC19LE520X_EN.indd 6LC19LE520X_EN.indd 6 11/30/2010 1:24:50 PM11/30/2010 1:24:50 PM