Filter
Top Products
16
Connecting an Audio Amplifier
■ When using coaxial cable:
It is possible to output audio through the DIGITAL AUDIO COAXIAL terminal.
DIGITAL AUDIO INPUT
COAXIAL
Rear of the TV
Coaxial cable
Connecting a PC
■ When using HDMI cable (INPUT 3):
HDMI OUTHDMI OUT
HDMI-certified cable
Rear of the TV
NOTE
Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to
the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI terminal and set “HDMI1 Audio” to “DVI”. (See
page 27.)
The HDMI terminals only support digital signal.
■ When using DVI-HDMI conversion cable (INPUT 3):
AUDIODVI OUT
DVI-HDMI conversion cable
Ø 3.5 mm stereo minijack cable
Rear of the TV
NOTE
When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting an DVI-HDMI conversion cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI
terminal and set “HDMI Audio” to “DVI”. (See page 27.)
•
•
•
Connecting to External Equipment
39X0131B_eng.indb 1639X0131B_eng.indb 16 5/18/10 11:40:42 AM5/18/10 11:40:42 AM