Filter
Top Products
3
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
1
Confi rm the screws supplied with the TV.
Screw driver
Screw
Soft cushion
Screws (
m
3)
(used in step 3)
2
Insert the stand base to the stand post on the
bottom of the TV. (
1
)
3
Insert and tighten the 3 screws into the 3 holes
on the bottom of the stand base. (
2
)
NOTE
• To detach the stand, perform the steps in reverse order.
Setting the TV
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Room antenna terminal
(75-ohm type)
Antenna cable
(commercially available)
To antenna
terminal
To AC INPUT
terminal
Connecting the AC cord
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
LC22LE520X_EN.indb 3LC22LE520X_EN.indb 3 11/24/2010 4:31:48 PM11/24/2010 4:31:48 PM