Filter
Top Products
Basic adjustment settings
Power control setting allows you to save energy.
No signal off
When set to "Enable", the power will automatically shut
down if no signal inputs for 15 minutes.
Press MENU and the MENU screen displays.
Press _/1_ to select "Power Control".
Press A/Y to select "No Signal Off", and
then press ENTER.
Press _/1_ to select "Enable", and then
press ENTER.
Enable
,, Five minutes before the power shuts down,
remaining time displays every minute.
® "Disable" is factory preset value.
® When aTV program finishes, this function may not operate.
No operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
Repeat steps 1 and 2 in No signal off.
Press A/T to select "No Operation Off", and
then press ENTER.
Press _/1_ to select "Enable", and then
press ENTER.
,, Five minutes before the power shuts down,
remaining time displays every minute.
® "Disable" is factory preset value.
Q -24