Filter
Top Products
7
Using external equipment
Setting the input source
To view external source images, select the input source using b on the remote control unit or b on the TV.
NOTE
• The cables marked with * are commercial items.
L-AUDIO-R
AV OUT
YP
B
(CB)
PR
(CR)
COMPONENT
Connecting a DVD player
You can use the EXT 3 or 4 (HDMI) terminals when
connecting to a DVD player and other audiovisual
equipment.
Connecting a VCR
You can use the EXT 2 terminal when connecting a
VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR to the EXT 2
terminal of the TV using the fully-wired SCART cable.
NOTE
• TV-VCR advanced AV Link systems may not be compatible
with some external sources.
• It is recommended to connect to the EXT 2 terminal when
using a decoder for ground wave signal input with a VCR.
If EXT 2 signals preset in Auto Installation or Programme
Setup, make sure to set “Decoder” to “EXT2” in the
Programme Setup “Manual Adjust” menu. (See page 13.)
Connecting a decoder
You can use the EXT 1 terminal when connecting a
decoder and other audiovisual equipment.
NOTE
• In cases when the decoder needs to receive signal from
the TV, make sure to set “Decoder” to “EXT1” in the
Programme Setup “Manual Adjust” menu. (See page 13.)
A game console, camcorder and some other
audiovisual equipment are conveniently connected
using the EXT 3 terminals.
NOTE
• The priority of the S-VIDEO and VIDEO terminal depends
on the Input Select setting. (See page 16.)
• You can connect the game console to EXT 1 or 3 terminals
to enjoy clearer picture.
VIDEO S-VIDEOL-AUDIO-R
AV OUTPUT
Connecting a game console or
camcorder
DVD player
AUDIO cable*
Component cable*
DVD player
HDMI cable*
When using an HDMI-DVI
conversion adapter, input the
Audio signal to AUDIO terminal
of EXT4.
EXT 3
EXT 4
VCR Decoder
SCART cable* SCART cable*
EXT 2
Decoder
Game console Camcorder
or
S-video
cable*
Composite video cable*
AUDIO cable*
EXT 1
SCART cable*
EXT 3
LC-26P50E_GB_a 05.6.13, 7:59 AM7