Filter
Top Products
TV menu
Automatically switch the TV to standby
(Sleeptimer)
Sleeptimer switches the TV to standby after a defined
period of time�
Press
1. MENU on the remote control and select
Features > Timer > Sleeptimer.
Press
2. ≥ to enter the Sleeptimer menu
Press
3. < or > to set the sleep time up to 180
minutes in steps of five minutes. If set to zero
minutes, the Sleeptimer is switched off.
Press
4. OK to activate the Sleeptimer.
NOTE
You can always switch off your TV earlier or reset Sleeptimer •
during the countdown�
Automatically switch the TV on
(Start time)
Start time switches the TV to a specified channel at a
specified time, from standby�
Press
1. MENU on the remote control and select
Features > Timer > Start time.
Press
2. ≥ to enter the start time menu.
Use
3. < or >, ≥ or ≤ to select and enter the menu
items to set.
Press
4. OK to confirm your choice.
Press
5. MENU to exit.
NOTE
To switch off • Start time, select Off in the Start time menu�
Automatically switch the TV off
(Stop time)
Stop time switches the TV to standby at a specified
time�
Press
1. MENU on the remote control and select
Features > Timer > Stop time.
Press
2. ≥ to enter the Stop time menu.
Use
3. < or > , ≥ or ≤ to select and enter the
menu items to set.
Press
4. OK to confirm.
Press
5. MENU to exit.
Lock TV channels or connected devices
(Auto Lock)
Lock TV channels or connected devices with a four digit
code to prevent children from watching unauthorised
content�
To set or change the Auto Lock code
Press1. MENU on the remote control and select
Features > Auto lock > Change code.
Press
2. ≥ to enter the code setup.
Enter your code with the number buttons.
3.
The Features menu reappears with a message
confirming that your code is created or changed.
NOTE
If you forget your code, enter ‘0711’ to override any existing •
codes�
To enter the Auto Lock menu
Press 1. MENU on the remote control and select
Features > Auto Lock and press > to enter your
code.
Enter your code with the number buttons.
2.
To unlock all channels and connected
devices
In the 1. Auto Lock menu, select Clear all.
Press 2. OK.
To set parental ratings
Some digital broadcasters rate their programs according
to age� You can set your TV to display only programs
with age ratings higher than your child’s�
In the
1. Auto Lock menu, select Parental rating.
Press
2. ≥ to enter.
Press
3. < or > to select age rating.
Select the age and Press
4. OK.
Press
5. Menu to exit the menu.
20