Filter
Top Products
45
Using external equipment
Option
MENU
Input Select
Input3 [AUTO]
AV-Y/C
COMPONENT
AUTO
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
DISPLAY OUTPUT-2
RS-232C
AC INPUT
110-240V
DISPLAY OUTPUT-1
YP
B
P
R
S-VIDEO VIDEO R-AUDIO-L
COMPONENT
INPUT 1
INPUT 2
YP
B
P
R
S-VIDEO
COMPONENT
VIDEO R-AUDIO-L
INPUT 3
MONITOR OUTPUT
ANT/CABLE 75Ω
ANT
AVC System (rear view)
HDTV tuner
Watching broadcasts via an HDTV tuner
Connecting an HDTV tuner
You can use the INPUT 3 terminal when connecting an HDTV tuner and other audiovisual equipment.
Displaying broadcasts via an HDTV tuner
When connecting to the INPUT 3 terminals, select
“INPUT3” and set the correct input signal type on “Input
Select” in the menu. (See page 52.)
Component video cable
(commercially available)
AV cable
(commercially available)
S-video cable
(commercially available)
When using component
video cable, select
“COMPONENT” for
“Input Select” in the
menu.
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
To watch an HDTV tuner image, select “INPUT3” from
the “INPUT SOURCE” menu using b on the remote
control unit or INPUT on the Display. (See page 52.)
A
• Each time b is pressed, the input source toggles.
• If the HDTV tuner image does not come in clearly, you
may need to change the input signal type setting on the
“Input Select” menu.