Filter
Top Products
Connecting external devices
NOTE
In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which
the decoder is connected in “Manual Adjust” in the “Analogue Setting” menu (Page 27).
TV-VCR advanced AV Link systems may not be compatible with some external sources.
You cannot connect the VCR with decoder using a fully wired SCART cable when selecting “Y/C” under “EXT2” in the “Input
Select” menu.
Controlling devices with SCART using AV Link
This TV incorporates four typical AV Link functions for smooth connections between the TV and other audiovisual
equipment.
One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source
(e.g. VCR, DVD player/recorder).
TV Standby
When the TV enters standby mode, the connected audiovisual equipment (e.g. VCR, DVD player/recorder) enters
standby mode as well.
WYSIWYR
When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers the channel preset information from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT2 terminal.
NOTE
Refer to the operation manuals of external equipment for details.
The AV Link function works only when audiovisual equipment is connected to the EXT2 terminal with a fully wired SCART cable.
The use of the AV Link function is only possible if the TV has enforced a complete auto installation with the connected
audiovisual equipment (Page 9, Initial auto installation).
The availability of the AV Link function depends on the audiovisual equipment used. Depending on the manufacturer and type
of equipment used, it is possible that the described functions may be completely or partially unusable.
•
•
•
•
•
•
SCART connection
Example of connectable devices
DecoderE
When using the EXT2 (SCART) terminal
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR using a fully wired
SCART cable.
E
Example of connectable devices
VCR E DVD player/recorderE
16
SCART cable
Decoder
SCART cable
SCART cable
DecoderVCR