Filter
Top Products
Connecting external devices
Inserting a CA Card
In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of the TV (Page 8).
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealers.
Inserting the CA Card into the CI Module
With the side with the gold coloured contact
chip facing the side of the CI Module marked
with the provider’s logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
Inserting the CI Module in the CI slot
Carefully insert the CI
Module in the CI slot
with the contact side
forward. The logo on
the CI Module must be
facing outward from the
rear of the TV. Do not use
excessive force. Make
sure the module is not
bent in the process.
1
2
Checking CI Module information
NOTE
Make sure that the CI Module is properly inserted.
This menu is only available for digital stations.
Press MENU and the “MENU” screen displays.
Press c/d to select “Digital Setup”.
The content of this menu depends on the provider of
the CI Module.
Press a/b to select “CI Menu”, and then press
OK.
•
•
1
2
•
3
18
Module
General information on CI Module displays.
Menu
Adjustment parameters of each CA Card displays.
Enquiry
You can input numerical values such as passwords
here.
NOTE
The content of each screen depends on the provider of
the CI Module.
E
E
E
•